FR24 Feeder Settings
Please note that changes will not take place until you save settings and restart the application!
Setting
Config file
Comment
Sharing key:
[16 characters]
Waiting for feed information to be loaded...
Please enter a valid sharing key to enable feed specific options.
Receiver:
DVBT Stick (default)
ModeS Beast (USB/SERIAL)
ModeS Beast (TCP)
SBS1/1e (USB)
SBS1/1e (TCP)
SBS3 (USB)
SBS3 (TCP)
microADSB (USB)
AVR (USB/SERIAL)
AVR (TCP)
DVBT Stick (dump978-fr24)
DVBT Stick (dump978-fa)
Use dump978-fa option if you are running Flightaware's DUMP978 with --raw-port
Host/IP:
[192.168.10.1:10000, localhost:30334]
UAT Port:
[Leave empty unless you actively changed dump978 settings, for dump978-fa the default is 30978]
COM/DEV/PATH:
[/dev/ttyUSB0, COM8, /usr/bin/dump1090]
Process arguments:
[Extra arguments for dump1090, ex --net-http-port 8080 ]
Baudrate:
default
57600
115200 (microADSB,etc)
921600 (SBS1/1er/3)
1Mbit (ModeS Beast)
3Mbit (ModeS Beast)
[COM/DEV only]
RAW data (30002/30334):
YES
NO
Enable/Disable raw data stream on port 30002(dvbt) or 30334(other)
SBS Feed (10001):
YES
NO
SBS1 compatible feed, port 10001, Kinetic Avionics RX only!
Decoded data (30003):
YES
NO
Enable/Disable decoded data stream on port 30003
MLAT:
NO
YES
Participate in MLAT calculations (requires at least Raspberry Pi B+ or later)
Extra settings:
(Edit config file to modify these settings)